Superiority
Chemical Name Methyl 4-Hydroxybenzoate
Molecular Formula C8H8O3
Molecular Weight 152.15
Structural Formula
CAS Number 99-76-3
Pac…
Details
Chemical Name Methyl 4-Hydroxybenzoate
Molecular Formula C8H8O3
Molecular Weight 152.15
Structural Formula
CAS Number 99-76-3
Packing 25 Kg, 20kg(4 x 5 kg)
The Shelf-life 5 years
Storage conditions and precautions Store in a well-closed containers.
Use Antimicrobial Preservative
NO. Test Specifications
1. Description Colourless crystals or white crystalline powder.
2. Solubility Freely soluble in ethanol (95%), in ether and in Methanol; very slightly soluble in water.
3. Identification Test A may be omitted if tests B, C &D are carried out. Tests B, C and D may be omitted if tests A are carried out.
A. The infrared absorption spectrum is concordant with the reference spectrum of methyl paraben or with the spectrum obtained from methyl paraben RS.
B. The light absorption in the range 230 to 360 nm of a 0.0005% w/v in ethanol (95%) exhibits a maximum at about 258 nm, absorbance at about 258 nm, 0.52 to 0.56.
C. Boil 10 mg with 10 ml of water, cool and add 0.05 ml of ferric chloride solution; a reddish violet colour is produced.
Dissolve 0.1g in 2 ml of ethanol (95%) boil and add 0.5 ml of mercuric nitrate solution; a precipitate is formed and the supernatant liquid becomes red.
4. Acidity Dissolve 1.0 g in sufficient ethanol (95%) to produce 10 ml. To 2 ml of the solution add 3 ml of ethanol (95%), 5 ml of carbon dioxide-free water and 0.1 ml of bromocresol green solution. Not more than 0.1 ml of 0.1M sodium hydroxide is required to change the colour of the solution.
5. Appearance of solution A 10% w/v solution in ethanol (95%) is clear or not more opalescence than Opalescence standard OS1 prepared by 5.0 ml of Opalescence standard & 95 ml of water .and not more intensely coloured than reference solution prepared by mixing 1.5 ml ferric chloride colorimetric solution, 0.8 ml cobaltous chloride colorimetric solution, 0.2 ml cupric sulphate colorimetric solution and 97.5 ml of 1% w/v HCl solution.
6. Chloride Not more than 500 ppm.
7. Sulphate Heat 2 g with 100 ml of water, cool, add sufficient water to restore the original volume and filter. To 10 ml of the filtrate add 0.15 ml of dilute hydrochloric acid and 0.1 ml of barium chloride solution; no turbidity is produced within 10 minutes.
8. Related substances Not more than 1.0 %.
9. Sulphated ash Not more than 0.1%
10. Assay, w/w 99.0 – 101.0%